• Temperature：-45′c ~ +100′c
• Work Condition：Outdoor
• Splicing：Vulcanization
• Diameter：100mm-850mm
• Application：Coal, Mine, Cement, Industrial
• Transport Package：Packed in Roll with UV Cover
• Specification：EP100-EP400
• Trademark：SR belting
• Origin：China
• HS Code：40101200
• Production Capacity：2500m,Day

Basic Info.

Temperature -45′c ~ +100′c Work Condition Outdoor Splicing Vulcanization Diameter 100mm-850mm Application Coal, Mine, Cement, Industrial Transport Package Packed in Roll with UV Cover Specification EP100-EP400 Trademark SR belting Origin China HS Code 40101200 Production Capacity 2500m/Day

Product Description

DIN-Y EP250/2 Cut Edges Rubber Textile Pipe Coneyor Belt for Industry

Market:
Power plants, Steel mills, Cement plants, Refineries, Port handing, Chemical industry, Mining industry, Bulk terminals etc.
Conveying coal, iron ore, alumina, petroleum coke etc. and difficult materials the powder that are similar to liquid.
coal mine, electric power plant, steel, chemistry, metallurgy etc.

Construction:
Using high tesion fabric as the belt reinforcement, and covered top and bottom with good quality abrasion resistance or other special properties rubber compound. The belt gradually roll into type U and finally into type tubular during operation, conveying materials under a hermitic condition to prevent material mixing and reduce pollution.

Features:
1. Protect the materials against external influences, avoid materials loss and spillage to protect the environment.
2. Simultaneous double load transport of different kinds of material in the upper and lower strand.
3. The material being carried is protected from rain, dust, abnormal temperature fluctuations, and wind
4. The number of transfer points is reduced because of this, leading to a lower overall conveyor length

Specification:
Can be customized accroding to your inquiry and applications.

Cover Grade:
•General Light Duty Service
    Common References: DIN-Z is very economical for moderately abrasive to conveyor small size materials.
•Medium Abrasion Resistance
    Common Reference: DIN-Y, DIN-N, RMA 2, AS-N are for moderate abrasion resistance applications, mostly 
    above ground. Regularly used for transportation of Coal, crushed ores, limestone, sand, cements etc.
•High Abrasion Resistance
    Common Reference: DIN-X, DIN-M, RMA1, AS-M are excellent abrasion resistance against cutting, impact,      
    heavy rocks, sharp stones.
•Super Abrasion Resistance
    Common Reference: DIN-W is used in extremely abrasive applications such as Copper & ore, sinter, coke. It 
    provides high resistance without increasing cover thickness and weight of the belt. 

Factory and Products:
We offer a wide range of conveyor belts with heat resistance, flame resistance, acid-alkali resistance, oil resistance, cold resistance, anti-burning and conventional properties as impact, tear and abrasion resistance etc.

Meanwhile, we supply professional guidance and after-service about products and installation tech-knowledge by remote or on-site, so don't hesitate to contact us at any time.

We have special quality inspection department to inspect all the conveyor belt before shipment.

1. Surface Inspection

1.1 Width measurement

1.2 Length measurement

1.3 Thickness measurement

1.4 Surface inspection

2. Lab Inspection

2.1 Adhesion strength test

2.2 Tensile strength test

2.3 Abrasion test

2.4 Elongation test

2.5 Especial test according to customer's requirements

Packing and Shipping :
There is a variety of packing solutions we can offer, and also be customized according to clients' and markets' requirements, such as different colors and lables.

SR Belting Business FAQ

Q:What is your production capacity?

A:SR Belting has 11 production lines and its capacity is 5000meters per day.

Q:How about your lead time?

A: It is 20 ~ 25days for regular belts.

Q: What is your M.O.Q ?

A: M.O.Q is 1*20GP.  The less quantity is ok but its cost will be higher.

Q: Do you have belt warranty?

A: At least 12months service life for regular belt. HR T4+ belt 3~6month.

Q: What certificates do you have ?

A: SR Belting has obtained ISO9001,ISO24001 and ISO28001 certifications.

Shandong Shengrun Rubber Co.Ltd ( SR Belting ) is a manufacturer which has specialized experience in producing conveyor belt for more than 20 years. Products are used in mining, coal ,port, metallurgy, cement, transportation and hoisting of materials.

SR Belting always strives to assure the best safety and excellent quality of conveyor belt to meet and even exceed beyond the national standards and customers satisfactions with its products and services. SR Belting has obtained ISO9001,ISO24001 and ISO28001 certifications.

SR Belting manufactures conveyor belts based on customers' requirements as Global ISO, German DIN, SANS and RMA etc.

We have independent design, research and development capabilities and can be customized to customers' requirements.
Our company possesses a complete set of inspection equipment, the independent chemical analysis and physical labs, ensuring all the raw materials to provide are excellent quality products.

We sincerely welcome friends at home and abroad to visit our factory to discuss cooperation and agency business.

Our partners:CHINA SHENHUA, CNBM, SINOMA, LAFARGE, SHOUGANG GROUP, CHINA HUANENG 

EXPO: