Carrying Idler Impact Idler V-Type Belt Drive Pulley of Belt Conveyor
Beijing Qianzhentianzheng Engineering Technology Co., Ltd- Material：Stainless Steel
- Surface Treatment：Polishing
- Motor Type：Frequency Control Motor
- Installation：Horizontal
- Carrying Type：Light, Medium, Heavy
- Light Connection Mode：The Shaft and Hub Are Single-Width Plate Welded Cy
Base Info
- Model NO.：D=250~2500mm
- Light Bearing Aperture：80-100mm
- Medium Bearing Aperture：120-180mm
- Heavy Bearing Aperture：200-220mm
- Drum Type：<=800mm; >800mm
- Heavy Connection Mode：The Shaft and Hub Are Expansion Sleeve Connection,
- Connection Type Between Shaft and Pulley：All Welding,Key Connection,Taper-Lock
- Length：400mm-3500mm or Customized
- Shaft Material：Deep Drawn Steel C45(DIN)
- Tube Material：S235jr or Stainless Steel
- Structure：Tube, Shaft, Self-Aligning Bearing, Bearing Seat
- Standard：Cema, JIS, DIN, ISO, GB
- Welding：Submerged Arc Welding
- Surface：Smooth, Diamond Grooved Lagging, Herringbone
- Transport Package：Steel Frame or Wooden Case
- Specification：5′′-60′′
- Trademark：XinRiSheng
- Origin：China
- HS Code：8431390000
- Production Capacity：5000PCS Per Wee
Description
It is sometimes necessary or desirable to improve the friction between the conveyor belt and the pulley in order to improve the torque that can be transmitted through a drive pulley.Improved traction over a pulley also assists with the training of the belt.
In such cases pulley drum surfaces are 'lagged' or covered in a rubberized material. This cover is usually 8 mm to 12 mm thick and can be plain or have a grooved pattern. The rubber lagging is vulcanized to the pulley shell to ensure that it remains attached under adverse operating conditions.Bearing Assemblies Bearings support the rotating shaft and hence the pulley. The bearings are housed in 'plummer blocks' which enable the mass of the pulley assembly plus the belt tension forces to be transmitted to the pulley supporting structure.Plummer blocks are often bolted to 'sole plates' which are welded to the structure.
The sole plates incorporate jacking screws to enable the pulley to be correctly and relatively easily aligned.
Several types of bearing housing, seals and end disc:
Pulley Drum Warehouse and package:
Pulley Drums:
In such cases pulley drum surfaces are 'lagged' or covered in a rubberized material. This cover is usually 8 mm to 12 mm thick and can be plain or have a grooved pattern. The rubber lagging is vulcanized to the pulley shell to ensure that it remains attached under adverse operating conditions.
The sole plates incorporate jacking screws to enable the pulley to be correctly and relatively easily aligned.
Several types of bearing housing, seals and end disc:
Pulley Drum Warehouse and package:
Pulley Drums:
Our Products: Belt Conveyors, Pulley Drum, Conveyor Rollers Idler, etc.