Heat Resistant Rubber Conveyor Belting High Temperature Conveyor Belts
HANBELT RUBBER CO., LTD.- Type：EP100
- Material：Rubber
- Inside Material：Fabric
- Feature：Oil-Resistant, Acid And Alkali Resistant, Tear-Resistant, Heat-Resistant, Cold-Resistant, Wear-Resistant
- Tensile Strength：Strong
- Belt Width：1000mm
Base Info
- Model NO.：EP100
- Number of Canvas Plies：4
- Top Covering Rubber Thickness：4mm
- Bottom Covering Rubber Thickness：2mm
- Tensile Strength Standard：15MPa
- Heat Resistant Temperature：120-300 Centigrade
- Transport Package：PVC Seaworthy Plastic Film
- Specification：200Mtr,Roll
- Trademark：Hanbelt
- Origin：Shandong, China
- HS Code：401012
- Production Capacity：3000mtr,Day
Description
3-6
5.Production Specification
Width range: 500mm-2200mm
Length: 100-300mtr/roll
Standard: DIN22102(Z,W,Y,X) AS1332(N.M),RMA(I,II) SANS1173(A,C,M,N)
6.Maintenance method
(1).During use and storage, the conveyor belt shall be kept clean, avoid direct sunlight or rain and snow, prevent contact with acids, alkalis, oils, organic solvents and other substances, and be one meter away from the heating device.
(2).During storage, the warehouse temperature should be kept between 18-40 ºC and the relative humidity should be kept between 50-80%.
(3).During storage, the conveyor belt shall be placed in rolls and shall not be folded. During storage, it shall be turned once a quarter.
(4).Conveyor belts of different types, specifications and layers should not be connected together, and their joints should preferably be bonded.
The type, structure, specification and number of layers of conveyor belt shall be reasonably selected according to the service conditions.
(5)Generally, the running speed of the conveyor belt should not be greater than 2.5 m / s. The materials and materials with large lumpiness and high abrasiveness.When using fixed unloading device, low speed shall be adopted as far as possible.
(6)The relationship between the diameter of the transmission drum of the conveyor and the cloth layer of the conveyor belt, the matching of the transmission drum and the redirection drum, and the requirements for the idler groove angle shall be reasonably selected according to the design regulations of the conveyor.
The feeding direction shall be along the running direction of the conveyor belt. In order to reduce the impact on the conveyor belt when materials fall, chute shall be adopted to reduce the falling distance of materials; In the material receiving section of the conveyor belt, the idler spacing shall be shortened and the buffer idler shall be used as the material leakage. The belt shall comply with the requirements and adopt a soft and appropriate baffle plate to prevent the baffle plate from being too hard and scratching the belt surface of the conveyor belt.
Q1. Are you a manufacturer?
Yes, we are specialist of conveyor belt production,our factory is located in Shandong Province.we have 6 large production workshops with 20,000m², We produce various conveyor belt.
Q2. What is the lead time?
10 days for bulk order production.
30 days for container order production.
Q3. How to pay?
T/T or L/C through bank account
Q4. How about package?
1.Usually the packaging is PVC seaworthy plastic film,We can pack according to the packing material and color required by customers.
2. With Iron roller core
Q5.Do you accept customization?
Yes, we accept customization, can design and produce conveyor belt products meeting customer requirements according to customer requirements, and can also paste the trademark designated by customers